Drain Grates for Trench, Slot, & Channel Drains

We can metal cast almost any drain grate in brass or aluminum. An example of our attention to detail is shown with our channel drain. Esthetics matters for the customer who will spend time looking at or walking past their pool or water feature. Taking advantage of finishes to enhance appeal is always a good choice to offer and a differentiator from other builders.

From the sleek design of the square, to the beautifully rounded curve of the circle, our available slot, channel, and trench drains offer unique details dependent on the design goal of the project. Each distinctive shape provides a lifetime of service with a terrific finish. Our custom metal drains provide a modern feel while mitigating service recalls for your clients.

Check out ALL our available metal drain grates. All made in the U.S.A., most of our grates will fit plastic trench channel troughs such as NDS or similar.

Round Drain - 4″ Aluminum

Drop-in with Lip. Cast as one piece. Cast in Aluminum, Yellow Brass, or Red Brass.

Round Drain - 4″ Yellow Brass

Drop-in with Lip. Cast as one piece. Cast in Aluminum, Yellow Brass, or Red Brass.

Round Drain - 4″ Red Brass

Drop-in with Lip. Cast as one piece. Cast in Aluminum, Yellow Brass, or Red Brass.

Round Drain - 4″ Aluminum

Drop-in without Lip. Cast as one piece. Cast in Aluminum, Yellow Brass, or Red Brass.

Round Drain - 4″ Yellow Brass

Drop-in without Lip. Cast as one piece. Cast in Aluminum, Yellow Brass, or Red Brass.

Round Drain - 4″ Red Brass

Drop-in without Lip. Cast as one piece. Cast in Aluminum, Yellow Brass, or Red Brass.

Channel Drain (Grate) - 4″ x 22” x ¾″ Aluminum

APPLICATION: Heavy Load Class for Traffic.

Grate fits inside NDS 400 Spee-D Trench Channel Drain. Suitable for concrete trench for or near driveway drainage.

Manufacturing: Last grate cut to allow easy end-to-end fit.

Channel Drain (Grate) - 4″ x 22” x ¾″ Yellow Brass

Channel Drain (Grate) - 4″ x 22” x ¾″ Red Brass

Channel Drain (Grate) - 4″ x 12″ Aluminum

APPLICATION: Channel support for drainage.

Manufacturing: Last grate cut to allow easy end-to-end fit.

Channel Drain (Grate) - 4″ x 12″ Yellow Brass

APPLICATION: Channel support for drainage.

Manufacturing: Last grate cut to allow easy end-to-end fit.

Channel Drain (Grate) - 4″ x 12″ Red Brass

APPLICATION: Channel support for drainage

Manufacturing: Last grate cut to allow easy end-to-end fit.

Lid for Overflow Drain - 4″ Aluminum

For use with plastic base or with overflow assembly (Part # PL1026). Cast in Aluminum, Yellow Brass, or Red Brass.

Lid for Overflow Drain - 4″ Yellow Brass

For use with plastic base or with overflow assembly (Part # PL1026). Cast in Aluminum, Yellow Brass, or Red Brass.

Lid for Overflow Drain - 4″ Red Brass

For use with plastic base or with overflow assembly (Part # PL1026). Cast in Aluminum, Yellow Brass, or Red Brass.

Lid for Overflow Drain - 4″ Aluminum

For use with plastic base. Cast in Aluminum, Yellow Brass, or Red Brass.

Lid for Overflow Drain - 4″ Yellow Brass

For use with plastic base. Cast in Aluminum, Yellow Brass, or Red Brass.

Lid for Overflow Drain - 4″ Red Brass

For use with plastic base. Cast in Aluminum, Yellow Brass, or Red Brass.

Square Drain Set - 4″ Aluminum

Cast in Aluminum, Yellow Brass, or Red Brass.

Square Drain Set - 4″ Yellow Brass

Cast in Aluminum, Yellow Brass, or Red Brass.

Square Drain Set - 4″ Red Brass

Cast in Aluminum, Yellow Brass, or Red Brass.

Drain Grates for Trench, Slot, and Channel Drains