Drain Grates for Trench, Slot, and Channel Drains

Reset filters

We can metal cast almost any drain grate in brass or aluminum.  An example of our attention to detail is shown with our channel drain.  Esthetics matters for the customer who will spend time looking at or walking past their pool or water feature. Taking advantage of finishes to enhance appeal is always a good choice to offer and a differentiator from other builders.   

From the sleek design of the square, to the beautifully rounded curve of the circle, our available slot, channel, and trench drains offer unique details dependent on the design goal of the project.  Each distinctive shape provides a lifetime of service with a terrific finish. Our custom metal drains provide a modern feel while mitigating service recalls for your clients.

Check out ALL our available metal drain grates. All made in the U.S.A., most of our grates will fit plastic trench channel troughs such as NDS or similar.    

 

Channel Drain - 90 Degree - 6-½″ x 15-¾″ Aluminum Channel Drain - 90 Degree - 6-½″ x 15-¾″ Aluminum

Connects with 6-½″ x 15-¾″ Channel Drain (Part # PL1071). Cast in Aluminum, Yellow Brass, or Red Brass.

Channel Drain - 90 Degree - 6-½″ x 15-¾″ Yellow Brass Channel Drain - 90 Degree - 6-½″ x 15-¾″ Yellow Brass

Connects with 6-½″ x 15-¾″ Channel Drain (Part # PL1071). Cast in Aluminum, Yellow Brass, or Red Brass.

Channel Drain - 90 Degree - 6-½″ x 15-¾″ Red Brass Channel Drain - 90 Degree - 6-½″ x 15-¾″ Red Brass

Connects with 6-½″ x 15-¾″ Channel Drain (Part # PL1071). Cast in Aluminum, Yellow Brass, or Red Brass.

Channel Drain - 6-1/2″ x 16″ Aluminum Channel Drain - 6-1/2″ x 16″ Aluminum

Connects with 90 Degree Channel Drain (Part # PL1029). Cast in Aluminum, Yellow Brass, or Red Brass.

Channel Drain - 6-1/2″ x 16″ Yellow Brass Channel Drain - 6-1/2″ x 16″ Yellow Brass

Connects with 90 Degree Channel Drain (Part # PL1029). Cast in Aluminum, Yellow Brass, or Red Brass.

Channel Drain - 6-1/2″ x 16″ Red Brass Channel Drain - 6-1/2″ x 16″ Red Brass

Connects with 90 Degree Channel Drain (Part # PL1029). Cast in Aluminum, Yellow Brass, or Red Brass.

Channel Drain - 6-1/2″ x 24″ Aluminum Channel Drain - 6-1/2″ x 24″ Aluminum

APPLICATION: Used for Concrete. Cast in Aluminum, Yellow Brass, or Red Brass.

Manufacturing: Last grate cut to allow easy end-to-end fit.

Channel Drain - 6-1/2″ x 24″ Yellow Brass Channel Drain - 6-1/2″ x 24″ Yellow Brass

APPLICATION: Used for Concrete. Cast in Aluminum, Yellow Brass, or Red Brass.

Manufacturing: Last grate cut to allow easy end-to-end fit.

Channel Drain - 6-1/2″ x 24″ Red Brass Channel Drain - 6-1/2″ x 24″ Red Brass

APPLICATION: Used for Concrete. Cast in Aluminum, Yellow Brass, or Red Brass.

Manufacturing: Last grate cut to allow easy end-to-end fit.