9-7/8" Skimmer Lid Replacement Part: The First Change to Refresh a Pool

Skimmer Lid Replacement Part

Winter changes your work schedule, but it does not have to shrink your revenue. If you build new pools in the summer, you already know why. The ground stays warm across the Southern tier of the USA, and warm ground digs easier and holds its shape while crews pour concrete and set steel. Once winter arrives, the ground cools and often freezes in the upper layers. Frozen soil resists excavation, slows compaction, and raises the risk of cracked shells if you pour too early. New construction slows down, and your crews need a different kind of work to fill the gap.

That gap is pool restoration, and it is one of the most reliable winter revenue streams available to a design-build professional. Homeowners who have lived with the same pool for ten, twenty, or thirty years are ready for a refresh. You do not need a full renovation to start that conversation. You need one part that the homeowner already looks at every single day: the skimmer lid.

Why the Skimmer Lid Comes First

People rarely study their pool equipment or inspect their plumbing design. They do look at the pool deck every time they walk outside. A skimmer lid sits right at eye level, and years of sun exposure crack it, fade it, or warp it out of shape. A cracked or discolored lid tells every guest that the pool is tired, even if the water chemistry and equipment are perfectly sound.

Here is why this makes the skimmer lid your best opening offer:

  • It costs less than almost any other pool upgrade you can sell.
  • You can install it in minutes, not hours.
  • The homeowner sees the result immediately, which builds trust for larger jobs.
  • It gives you a natural way to inspect the rest of the pool and quote additional work.

Think of the skimmer lid as your foot in the door. Once you replace it, you have already opened a conversation about the skimmer basket, the deck hardware, and eventually a full restoration package.

The 9-7/8" Skimmer Lid: A Fact Worth Knowing

If you stock one size of replacement lid this winter, make it the 9-7/8" size. It is the most common skimmer lid diameter installed in residential pools across the country, and two of the biggest names in the industry build around it.

  • Hayward's Skim Master Series skimmers use the 9-7/8" lid as their standard fit.
  • Pentair's L2 skimmer also uses the 9-7/8" size.

Because these two brands have dominated skimmer installations for decades, you will find this size on a huge share of the pools you visit this winter. Stocking this size first lets you say yes on the spot instead of scheduling a return trip once the part arrives.

What Happens Inside the Foundry

Contractors ask us why some lids hold up for fifteen years and others crack within two summers in stone or concrete. The answer comes down to the metal casting process and the material choice behind it.

At A&B Foundry, we cast skimmer lids and related pool hardware from aluminum and red / yellow brass. Each metal earns its place:

  • Aluminum resists corrosion, stays lightweight for easy handling on the job site, and holds a clean finish under years of sun and pool chemicals.
  • Brass brings extra strength to hardware that takes daily wear, and it resists the pitting that lower-grade metals develop over time.

The casting process itself matters as much as the metal. A well-controlled pour with tight temperature management produces a lid with even wall thickness and no hidden air pockets. Air pockets are the hidden cause of most lid failures, since they create weak spots that crack under seasonal temperature swings. When you buy a cast lid instead of an injection-molded plastic one, you buy a part built to outlast the pool equipment around it.

Building a Winter Restoration Pipeline

Use the skimmer lid swap as the entry point, then walk the rest of the pool with your client. Check the deck hardware, the return fittings, and the coping. Most backyards built more than a decade ago carry several small upgrades worth bundling into one visit.

If your client wants to go further this season, point them toward smart, budget-conscious upgrades that stretch their dollar during a period of high material costs. Our article on restoring an existing pool on a tight budget walks through exactly which upgrades give homeowners the most value per dollar spent.

Buy 9-7/8" Skimmer Lid by A&B Foundry 

A&B Foundry specializes in cast aluminum and brass hardware for the swimming pool industry. We control every stage of our casting process to deliver parts that hold up against sun, chemicals, and years of daily use. Contractors trust us for accurate sizing, consistent quality, and fast turnaround on the parts that keep pool restoration projects moving, even in the middle of winter. Contact us immediately at (972) 247-3579.

 

FAQ

Why does winter work well for pool restoration instead of new construction?

Cold ground freezes in the upper layers, which makes excavation difficult and raises the risk of a poorly set shell. Restoration work does not require digging, so it moves forward on schedule regardless of ground temperature.

Why start a restoration project with the skimmer lid?

The skimmer lid sits in plain view every day, so it gives the homeowner an immediate, visible result. It also costs little, installs quickly, and opens the door to a larger restoration conversation.

What is the advantage of a cast metal skimmer lid over a plastic one?

A cast aluminum or brass lid resists cracking, fading, and warping far longer than injection-molded plastic. The metal casting process also eliminates the air pockets that cause most plastic lids to fail early.

Does A&B Foundry sell direct to contractors?

Yes. We supply cast aluminum and brass pool hardware, including the 9-7/8" skimmer lid, directly to design-build professionals and contractors across the country.