Cast Aluminum vs. Plastic Pool Lids: Which Lasts Longer?

Cast aluminum lasts longer than plastic. Your pool skimmer lid sits in direct sun, takes foot traffic, and meets pool chemicals every day. Plastic costs less upfront, but it often fails first. At A&B Foundry, we cast aluminum and brass products every day, so we see how each material holds up over time. This guide shows how the two compare and how you can choose well for your next project.
Cast aluminum wins in most pool deck conditions. A solid metal lid can serve for decades. Plastic lids commonly warp, fade, or crack within a few seasons in hot, sunny climates, depending on the resin and the UV additives.
How A&B Foundry Casts an Aluminum Lid
At A&B Foundry, we cast each aluminum lid in four steps:
- Pattern: We start with a pattern in the shape of the lid, including the texture you choose, such as Waffle, Leatherette, or Two Ring Generic.
- Mold: We pack sand around the pattern to form a mold, then remove the pattern.
- Melt and pour: We melt aluminum and pour it into the mold.
- Cool and finish: The metal hardens, and we break out the sand, trim the part, and finish the surface.
You get a solid, one-piece lid with crisp detail. Custom logos follow the same path. We build the pattern from your artwork, then cast it in aluminum or brass.
Cast Aluminum vs. Plastic Pool Lids
- Heat and sun: Pool decks in direct sun can reach 140°F. Heat softens plastic, and UV rays make it brittle and faded. Aluminum keeps its shape.
- Foot traffic: Cast metal removes give away from traffic load. Customers have come in sharing stories of how they’ve walked on a lid and the plastic gave away from the load.
- Weight: Aluminum is about three times denser than polypropylene (2.7 vs. 0.9 g/cm³). A heavy lid stays seated, and wind and kids cannot easily move it.
- Chemicals: Plastic resists chlorine well. If you have salt water, consider a lid casted in red brass, which has a higher copper content.
- Cost: Plastic costs less on day one. Replacing it as per the manufacturer's suggestion every few years costs more over time.
- Looks: Cast metal adds texture and a custom element of high-end design. Plastic is limited in color options given the variation of natural stone.
10" Aluminum Lid for Round Skimmer (PL4026AL)
Our Lid for Round Skimmer, 10" cast in aluminum, gives you a durable option. It measures 10-7/16" across with a 1/2" depth.
You can choose from three patterns:
- Two Ring Generic (2RG)
- Leatherette (L)
- Waffle (W)
You can also order the same lid in yellow brass or red brass. Need help picking a pattern? In our article about choosing the right skimmer lid, you can find all the answers.
Free Checklist for Contractors
In our next article, we will post a Skimmer Lid Customer Meeting Checklist for contractors when you sit down with a customer. It will help you:
- Confirm skimmer shape, frame size, and sun exposure
- Explain material choices in plain terms
- Match a lid pattern to the deck
- Ask about logos and custom work
- Set budget, lead time, and next steps
Go Custom With Your Brand
A&B Foundry LLC designs and casts aluminum and brass products in Dallas, Texas. We make skimmer lids, drains, water spouts, plaques, access panels, and custom parts. Hotels, resorts, and builders can add a logo or text to a lid. Our custom round lid (PL4043) turns a small part into a branded detail. Send your artwork, and we will cast it. Contact us for more details at (972) 247-3579.
FAQ
Do aluminum pool lids rust?
No. Aluminum has no iron, so it does not rust. Harsh conditions can still cause surface corrosion, so ask about finish options.
How long do plastic skimmer lids last?
It varies with sun and chemicals. In hot climates, many plastic lids need replacement within a few years per the manufacturer's suggestion.
Can I add a custom logo?
Yes. We cast home builder’s, pool contractors, or commercial logos for hotels, resorts and apartment complexes into custom lids. Have a unique item to order? We are up for the challenge! Send us the details and be sure to attach a picture of your project.